Cambridge Canvas Centre Limited has developed and patented this unique banner on a roll product for the sign and graphics industry that we sell nation-wide through sign making suppliers and equipment distributors.

What makes Bandanna Banner so unique?
We have automated our hemming system to accurately measure 1-inch hems and then simultaneously thermo-weld seams along top & bottom lengths without sewing. Then our automatic grommet system accurately measures, punches, and sets 2 grommets, spaced 3 inches apart o/c every 24 inches along top & bottom lengths with pin-point accuracy. Each roll is then rolled on a tube and professionally boxed in standard 24 yard rolls or special 12 yard roll. Standard widths of 22, 34 and 46 inches.

Bandanna Banner
Typical Performance Properties

Weight: 14oz +/- 1oz / per sq. yd.

Width: 22, 34 & 46 Inches

Roll Size: 12 & 24 Yds / Roll

Embossing: Polished

Base Fabric: 9x9 500 D Poly

Flame Resistance (5903)    
After Flame 2 Seconds 2 Seconds
Char Length 3.5 Inches 3.5 Inces
NFPA 701 (s) Pass  
Wicking None  
Heat Sealability Yes  
Weatherometer Testing / Florida Type Conditions- Fade Resistance 1.5 years

Lay-flat characteristics make it Fast “n” Easy when applying your vinyl graphics.
Simply roll out the banner material in multiples of 2 feet, then cut between our patented “Double-Grommet” spacing, this will allow you to conveniently cut off the length required and have a grommet both at the ends of your first banner and the start of your second banner off the roll.
Our double grommets are spaced 3 inches apart o/c so that 1 inch double-sided hem tape can be used to finish the ends if required.

Disclaimer: Above values are average values, as tested in our laboratory. All productions are subject to variation. This information is not intended to be used as strict specification. All data obtained in our laboratory is considered accurate, however, no warranty is expressed or implied.

This product is formulated to accept all major brands of
computer cut vinyl.